Victoria's most trusted energy consultants. Contact us today for a quote on your Section J Report

Experts In Section J Report In Australia!

We do everything in-house

PassivEnergy complete over 600 Section J Report per year and are experts in commercial building certification. Section J Report of the National Construction Code (NCC)  Volume 1, shows the energy efficiency requirements of non-residential buildings. The main focus is to reduce the amount of energy a building requires for its normal operation.

Your free quote within 1 hour!



Developed With Ease

Our reports have been created considering convenience. We rundowns all prerequisites for our customers and our manufacturers toward the start of our reports yet additionally have every one of our calculations in a simple to peruse group so the structure surveyor is happy with our counts.

For more complex sites/design, having the CAD files will also help to model critical information.

The Process

passivenergy quote timeline

Section J Report Done Right

This was in response to concerns over global warming, and in July 2000, the Australian Government announced an agreement had been reached with industry and State and Territory Governments to adopt a two-pronged approach to reducing greenhouse gas emissions from buildings.

The first approach was the introduction of mandatory minimum energy performance requirements through the Building Code of Australia (BCA), and the second approach was the encouragement of best practice voluntary initiatives by industry. The industry was supportive of this two-pronged approach, taking the view that building-related matters should be consolidated in the BCA wherever possible.

Given the importance of the energy performance of buildings to overall national greenhouse gas emissions performance, the Australian Building Codes Board (ABCB) and the Australian Greenhouse Office signed a Memorandum of Understanding to jointly develop the BCA Energy Efficiency Provisions.

The Energy Efficiency Project was endorsed under the National Framework for Energy Efficiency (NFEE), an agreement between all Australian Governments established to improve energy efficiency. The objective of NFEE is to unlock the significant economic potential associated with the increased implementation of energy efficiency technologies and processes to deliver the least cost approach to energy efficiency in Australia.

On the off chance that the expansion and inward works are under half, at that point a two rating strategy can be utilized. This technique empowers us to play out a 6-star energy rating on the current dwelling first with all the current conditions included, with a normal consequence of 1.5-3.5 stars can be normal.

At that point, we play out another 6-star vitality rating with the proposed expansion also.

The proposed volume should be 6 stars, yet this arrives at the midpoint of out with the current dwelling results.

This strategy is regularly more financially savvy as you just need to focus on the proposed augmentation and the current rooftop hole.

Alternative solutions for Section J Report

JV3 Assessment is an alternative solution for non-residential buildings when a Section J report is required. When the design of a building does not meet the Deemed to Satisfy (DtS) requirements under the National Construction Code (NCC), a JV3 assessment can be acquired.

JV3 allows much more flexibility relating to the design choices. The assessment uses a reference building to compare the overall assumed energy consumption of new buildings with respect to their location and climate.

The team at PassivEnergy have helped many designers, builders and architects with their local government energy requirements by providing alternative assessments.  For more information about JV3 certifications, call now!

ADDRESS

Suite 60, Level 2, UL40, 1341 Dandenong Road, Chadstone VIC 3148

Call Us Today

Telephone: (03) 8769 5619

There are 7 sections that need to show compliance for

  • J1 Building Fabric

  • J2 Glazing

  • J3 Building Seal

  • J4 Air conditioning and ventilation system

  • J5 Artificial Lighting and Power

  • J6 Heated Water Supply

  • J7 Access for maintenance and Monitoring Facilities

What Does A Section J Report Look Like

Section J Report Are Mandatory For Victorians

The aim of NCC is to use less energy for heating, cooling, ventilation, lighting and other services used by buildings which require the use of energy. To be energy efficient means to work towards improving systems that directly consume energy including lighting, air-conditioning and heating. This also includes working towards maintaining a greater level of control regarding the way heat flows in and out of the building’s fabric.

The energy efficiency requirements also take into account the following:

  • Part J1 – The building’s fabric performance
  • Part J2 – External glazing and shading
  • Part J3 – Sealing of the building
  • Part J5 – Heating, ventilation and air-conditioning systems
  • Part J6 – Performance of artificial lighting
  • Part J7 – Heated water supply system for heating and pumping of swimming pools and spas
  • Part J8 – facilities used to monitor energy use.

Get your project approved today with PassivEnergy

Frequently Asked Questions About Section J Report

The Australian Building Codes Board views the building sector as a major contributor to greenhouse emission gases into the atmosphere. According to the board, energy used in buildings makes up for about 20 per cent of all energy-related greenhouse gases. These facts mean that buildings are an important area when it comes to reducing greenhouse gases for mitigating the impact of climate change. The ABCB, in 2006, added Section J to the Building Code of Australia. In so doing, it set out requirements for all kinds of buildings with regards to energy efficiency.

Segment J of Volume One in the National Construction Code (NCC) characterizes the vitality effectiveness necessities for Class 3, 5, 7, 8 and 9 business structures. The report diagrams the arrangements that are fundamental for business building improvements to agree to the prerequisites laid out in Section J of the NCC.

The Building Code of Australia (BCA) traces that Section J report ought to be readied utilizing Deemed-to-Satisfy (DTS) arrangements and check to utilize a reference building (JV3) confirmation philosophy.

You will require a Section J report if:

Your improvement is non-private (business), and falls between the NCC Building classes of 2-9

It is required in all conditions of Australia. Most gatherings and certifiers need a Section J appraisal amid the Development Application organize and the last report at the development guaranteed to arrange.

If interested in learning more about section J report read below:

 If you want to remodel or construct a commercial building, for instance, an office, a factory or warehouse, it is compulsory that you have a Section J report. These reports confirm that the plans for the building are compliant with government regulations.

 Section J exists primarily to minimise the emission of greenhouse gases through regulation of designs and materials used when putting up a new commercial building. A section J report details the construction materials you intend to use in your project, and what should be done to make the building comply with the standards prescribed by the BCA Section J.

 After assessing your plans and coming to the conclusion that they are deemed to satisfy the Section J requirements, you are given a BCA Section J compliance report. This gives you the green light to proceed to the next stage of your construction project.

 At PassiveEnergy, we have been doing Section J assessments since the time that the regulations came into force. Throughout this time, we have developed a reputation for producing accurate compliance reports that are easy to understand.

 Our belief is that if something needs to be done, it has to be got right at the first time of asking. If we notice an issue that can complicate compliance, we discuss it with our client and offer them tips on how to abide by building code compliance.

 In the event that there are standard Deemed-to-Satisfy guidelines that lead to difficulty in compliance, we have the qualification and expertise to do a Verification Method assessment through using energy modelling method to produce Alternate Solution.

 An example is where we determine changes to other building aspects that could be effected to remove or reduce under-slab floor insulation condition.

BCA Section J report are by and large directed by exceedingly qualified and experienced vitality proficiency specialists. Vitality proficiency experts who perform Section J report must have a top to bottom learning of vitality effectiveness proportions of both the mechanical and electrical frameworks of a structure. Knowing about the warm properties of structure textures is additionally significant.

Esteemed to Satisfy (DTS) arrangements add to the heft of the NCC. Creators and developers must meet explicit execution prerequisites. The important areas are recorded previously.

J1 – Building Fabric

J2 – Glazing

J3 – Building Sealing

J4 – Air-Conditioning and Verfacion Systems

J5 – Artificial Lighting and Power

J6 – Hot Water Supply, Swimming Pool and Spa Pool Plant

J7 – Access For Maintenance And Monitoring Facilities

JV3 Assessment is a presentation based elective answer for non-private structures when a Section J report is required. At the point when a structure configuration does not meet the DTS prerequisites under the NCC, a JV3 appraisal can be obtained.

JV3 permits significantly more adaptability identifying with the structure decisions. The appraisal utilizes a reference working to look at the by and largely accepted vitality utilization of new structures regarding their area and atmosphere.

The group at PassivEnergy help numerous planners, developers and modellers crosswise over Australia with their nearby government vitality prerequisites by giving elective appraisals. For more data about JV3 affirmations contact us now. For all enquiries, we’re willing to help!

JV3 Assessment is a presentation based elective answer for non-private structures when a Section J report is required. At the point when a structure configuration does not meet the DTS prerequisites under the NCC, a JV3 appraisal can be obtained.

JV3 permits significantly more adaptability identifying with the structure decisions. The appraisal utilizes a reference working to look at the by and largely accepted vitality utilization of new structures regarding their area and atmosphere.

The group at PassivEnergy help numerous planners, developers and modellers crosswise over Australia with their nearby government vitality prerequisites by giving elective appraisals. For more data about JV3 affirmations contact us now. For all enquiries, we’re willing to help!

Thanks to our vast experience and lots of expertise in this area, we are in a position to handle the entire process for you. We will keep you totally compliant and at the same time ensure that you are using the least amount of energy during the construction of your project.

We have a full commitment to helping to put up your building, and we want to be as energy-efficient as possible. In the end, you will not only be able to reduce your project’s environmental footprint, but also keep your expenses down.

If you live in Victoria and want to put up a commercial building, you can trust us to us to handle all your Section J compliance needs, and offer cost-effective and sustainable solutions.

When you choose PassiveEnergy to be in charge of making your report, you can trust that the whole process will not only be swift but also hassle-free.

Within 2 hours of contacting us, we’ll return with a quote. If you choose to work with us, we will deliver a report to you within 5 business days.

In the event that your plans don’t meet the BCA Part J requirements, our expert team of staffs will help you by giving you all the necessary advice and information that you need to make the changes.

For Section J report, our professional energy assessors will report on all buildings listed under section 2-9. The only exempted classes are class 1, which is a house, and class 10 buildings (garage). Anything else is deemed to be a commercial construction and are said to be between classes 2 and 9.

Our skilled engineers will assess against the requirements of the thermal resistance of the building envelope. These include R-values for floors and roofs, walls, solar heat gain requirements and glazing allowance for conductibility. Also, we will include testing as well as installation of thermal breaks, compensation for downlights and insulation.

When creating our reports, one thing that we emphasize is ease of use. Our assessors will summarise all the requirements for you at the start of each report. Also, we present our computations in formats that are easily understandable which makes it easy for the building surveyors. We boast a refined report layout that is as technically sound as it is easy to understand, and is acceptable to every council. When you hire PassiveEnergy to carry out Section J assessment for you, you can look forward to quick turnaround, competitive quotes, and experienced assessors. Our customer representatives are always on standby to attend to clients. Call us today and experience quality Section J report at PassivEnergy!

Would you like us to be in charge of your Section J report? If so, just get in touch with us through phone call or email. We will give you a detailed and no-obligation quote for free!

We pride ourselves in providing competitive prices and, and we guarantee to give you a thorough BCA Section J report on time. This is irrespective of where your project is. It doesn’t matter wherever you are. Whether you are in Melbourne, Sydney, Perth, Geelong, Canberra, Gold Coast or anywhere, we can attend to you! Just get in touch now!

Your free quote within 1 hour!